How to connect the iGlass Smart Block W12
Power Supply +24v DC
Use Power Supplies +24v DC (15W-30W-60W-100W-150W) - iGlass Smart Block W12 10W max
It is convenient to connect contacts in our iGlass Smart Blocks
Digital inputs ( +24V DC Dry contacts )
RS485
Isolated RS485 interface, isolation allows connecting blocks to a single bus over long distances.
You can connect all the Smart Home Blocks iGlass via RS485, as shown in the picture below:
LAN | PoE+
Not need use Power Supply if you use LAN Switch with PoE+ 802.3AF/AT or Adapters with PoE+ 802.3AF/AT
You can connect all the Smart Home Blocks iGlass via LAN or PoE+, as shown in the picture below:
Digital outputs
