How to connect the iGlass Smart Block R2

Power Supply +24v DC
Use Power Supplies +24v DC (15W-30W-60W-100W-150W) - iGlass Smart Block R2 power consumption 5W max

It is convenient to connect contacts in our iGlass Smart Blocks

RS485
Isolated RS485 interface, isolation allows connecting blocks to a single bus over long distances.

You can connect all the Smart Home Blocks iGlass via RS485, as shown in the picture below

LAN | PoE+

Not need use Power Supply if you use LAN Switch with PoE+ 802.3AF/AT or Adapters with PoE+ 802.3AF/AT

You can connect all the Smart Home Blocks iGlass via LAN or PoE+, as shown in the picture below

Digital outputs
The default relays is NO (Normally Open), relays 16A but we do not recommend giving a load of more than 10A, you can apply a load or use as a digital output (Command Relay)
Easy Connect Ajax Sensors
Get all the statuses of sensors Ajax in your smart home system, data is transmitted to the RS485 bus and local network at the same time

You can connect all Ajax sensors through our iGlass Configurator

All status sensors are visible in the system and you can check the data transfer

iGlass Configurator (Windows10 x64)